Brake Caliper Covers for 2020-2025 Ford Escape Front and Rear Set

$249.99 – $299.99

-

Pick a color and engraving to see a sample image and add to your cart.

Verify Fitment Requirements
Want a different color or engraving?
Customize

– Includes a Set of 4 caliper covers and stainless-steel fastening clips _x000D_
– Made with Aerospace Grade Aluminum _x000D_
– Quick & Easy Installation; Approx. 1 hour _x000D_
– Tested for Safety and Durability _x000D_
– Less Brake Dust, Cleaner Wheels

Complimentary Shipping
3 Year Warranty
Free Lifetime Clip Replacement

Please verify your exact vehicle is listed below and it meets the minimum wheel size for precise fitment. If you have any questions, please contact us or message us on live chat.

Year Make Model Submodel Requirements
2025 Ford Escape Active
2025 Ford Escape Platinum
2025 Ford Escape ST-Line
2025 Ford Escape ST-Line Elite
2025 Ford Escape ST-Line Select
2024 Ford Escape Active
2024 Ford Escape PHEV
2024 Ford Escape Platinum
2024 Ford Escape ST-Line
2024 Ford Escape ST-Line Elite
2024 Ford Escape ST-Line Select
2023 Ford Escape Active
2023 Ford Escape Base
2023 Ford Escape Platinum
2023 Ford Escape ST-Line
2023 Ford Escape ST-Line Elite
2023 Ford Escape ST-Line Select
2022 Ford Escape S
2022 Ford Escape SE
2022 Ford Escape SE Hybrid
2022 Ford Escape SEL
2022 Ford Escape SEL Hybrid
2022 Ford Escape Titanium
2022 Ford Escape Titanium Hybrid
2021 Ford Escape S
2021 Ford Escape SE
2021 Ford Escape SE Sport Hybrid
2021 Ford Escape SEL
2021 Ford Escape Titanium
2020 Ford Escape S
2020 Ford Escape SE
2020 Ford Escape SE Sport Hybrid
2020 Ford Escape SEL
2020 Ford Escape Titanium

Front Clips

Rear Clips

Description

MGP Caliper Covers are a car accessory designed and manufactured specifically for your 2020-2025 Ford Escape to cover up and hide those ugly brake calipers. These aluminum caliper _x000D_
covers are finished with a high-quality powder coat. MGP caliper covers will _x000D_
enhance your wheel appearance and curbside appeal with either black, yellow or red caliper covers. MGP Brake Caliper Covers are tested for safety fitment and are _x000D_
licensed by major manufacturers.

WARNING: This product may contain chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.
https://www.p65warnings.ca.gov/

Question Icon

FAQ Assistance?

Close Icon

FAQ Assistance?

  • Are MGP Caliper Covers difficult to install?

    No, we designed the caliper covers to make the installation quick and easy. We provide stainless-steel clips that will clip directly onto your calipers. With the basic tools, you can install MGP caliper covers within an hour. The hardest part is removing the wheels! Check out our installation video and guide.

  • Will the caliper covers fit my wheels?

    We specifically designed our Caliper Covers to work with most OEM wheels. While most aftermarket wheels do provide additional clearance, we highly recommend that you confirm spacing before placing your order. Our Caliper Covers only require 3mm of clearance (about two stacked quarters) between your stock brake calipers and factory wheels.

    MGP provides the minimum wheel size in the fitment table located at the bottom of every product page. Please verify if your wheels meet or exceeds the minimum wheel requirement.

    To check your wheel size, the last 2 digits will indicate your wheel size. 

    wheel-size-diameter3.jpg

  • Do the caliper covers trap in brake heat?

    No, we designed the Caliper Covers to dissipate brake heat. Our specially engineered covers divert heat away from your brakes and out through the top of your factory calipers. We hold our production standards to an OEM level to ensure safety and durability. Check out this video on our  MGP Caliper Covers Heat Test .

  • Does the paint hold up against brake heat?

    We are very confident in our product and guarantee for 3 years that the finish will withstand any heat and corrosion that may occur.

    To view our 3 year warranty, please click here.

  • What are MGP Caliper Covers made of?

    MGP Caliper Covers are made with Aerospace Grade Aluminum (not with a plastic material). The bolt design across the top and logos/design are engraved, so they never scratch off. Each set of caliper covers include stainless steel clips that fasten directly to your caliper brackets making it quick and easy to install.

More Questions