Nissan / NV2500 / 2015 / SV

IMPORTANT: Additional information is needed to determine which covers will fit your vehicle. Please choose the appropriate option.


DRILL AND TAPPING ARE REQUIRED

The vehicle you have selected has a brake caliper that does not support our traditional caliper cover mounting method.

Please refer to this video for a tutorial on how to drill and tap your caliper

To use a tap, choose the size that is appropriate for the size of the bolt or the hole you want to thread. Place the tap into the special wrench and tighten it in. Then, place the cutting end of the tap over the hole and turn. Use cutting oil to lubricate the tap.

Here is what is included in the drill and tap kit;

Drill and Tap Instructions